Spoke Wrench Heads
11 reviews
Application Chart
| Beta | Wrench Head Size |
|---|---|
| All | 6.8 F/R |
| BMW | Wrench Head Size |
| GS 650 | 5.6 F, 6.0 R |
| GS 800 | 6.0 F, 6.8 R |
| Cobra | Wrench Head Size |
| 65: All | 6.4 F/R or Spline |
| Gas Gas | Wrench Head Size |
| Gas Gas - older models |
6.0 F/R |
| Trials bikes | 6.0 F, 6.8R |
| 2015-2019 Moto/Off-Road | 6.0 F, 6.8 R |
| 2020+ Full Size Models 85cc+ | 6.8 F/R |
| 50/65: all | 5.5 F/R |
| Honda | Wrench Head Size |
| CR 125/250/500: up to 01 | 6.0 F, 6.3 R |
| CR 125/250: 02-07 | 6.0 F, 6.5 R |
| CRF 250/450: 02-present | 6.0 F, 6.5 R |
| CR 85/150: 07 current: | 5.6 F/R |
| CR 80/85: up to 2010 | 6.0 F/R |
| XR 250/400/600/650R: all | 6.0 F/R |
| XR/CRF 80/100: all | 5.0 F/R |
| CRF 150/230: all | 5.6 F/R |
| XR/CRF 50: all | 4.0 F/R |
| * The 6.0 and 6.5 Heads are the correct Heads to use with our wrenches on any Honda calling out for either a 5.9 or 6.4 head size. | |
| Husqvarna | Wrench Head Size |
| 65 | 5.5 F/R |
| 85/105 | 6.8 F/R |
| All models: up to 99 | 6.2 F/R |
| All models: 00-05 | 5.6 F, 6.0 R |
| All models: 06-present | 6.8 F/R |
| Kawasaki | Wrench Head Size |
| KX 60/65: all | 5.0 F/R |
| KX 80/85/100: 99-10 | 6.0 F/R |
| KX 125/250/500: up to 99 | 6.0 F 6.3 R |
| KX 125/250/250F: 99-04 | 6.7 F/R |
| KX 125: 05-07 | 6.7 F/R |
| KX 250: 05-07 | 6.0 F 6.7 R |
| KX250F/450F: 06-present | 6.0 F 6.7 R |
| KLX 250/300: all | 6.0 F/R |
| KDX 200/220: all | 6.0 F/R |
| KTM | Wrench Head Size |
| All full size models | 6.8 F/R |
| 85/105 | 6.8 F/R |
| 50/65: all | 5.5 F/R |
| Suzuki | Wrench Head Size |
| RM 85: all | 5.0 F/R |
| RM 125/250/RMZ250F:00-04 | 6.2 F, 6.7 R |
| RM 125/250: 05-present | 6.2 F, 6.7 R |
| RMZ 250F/450F:05-present | 6.2 F, 6.5 R |
| DR/DRZ 250/350:all | 6.0 F/R |
| DRZ 400: 00-present | 6.2 F, 6.5 R |
| Sherco | 6.7 F/R |
| TM | Wrench Head Size |
| Moto/Off-road | 6.0 F/R |
| Tusk | 6.5 F/R |
| Yamaha | Wrench Head Size |
| YZ/WR 125/250/400:up to 99 | 6.0 F, 6.2 R |
| YZ/YZF/WR 125-250 / 250-400-426-450F: 99–04 | 6.2 F, 6.7 R |
| YZ 125/250: 05-present | 6.2 F, 6.5 R |
| YZ/WR 250F/450F:05 | 6.2 F, 6.7 R |
| YZF/WR 250F/450F:06-present | 6.2 F, 6.5 R |
| YZ 80/85: all | 5.6 F/R |
| YZ 65 | 5.0 F/R |
| TTR 250: all | 5.6 F, 6.0 R |
| TTR 125: all | 5.6 F/R |
| TTR 50: all | 4.0 F/R |
| HARLEY-DAVIDSON** | Wrench Head Size |
| Pre-1980 ** | 5.6 F/R ** |
| 1980 to current ** | 6.0 or 6.2 (see below) ** |
|
We have narrowed down the Harley-Davidson applications to 3 sizes, 5.6, 6.0, and 6.2. This has been very difficult due to the vast number of units sold. Above are the head sizes that Harley Davidson orders from us as well as the general size by decades. Rad Wheels require a 6.2mm head. Warp 9 Wheels require a 6.8mm head. If you have any questions or feedback shoot us an email or call so we can get you the correct head for your wheels. |
|
Chart Key
-
F - fits front
-
R - fits rear
-
F/R - fits front and rear
-
Head sizes: 4.0, 5.0, 5.6, 6.0, 6.2, 6.3, 6.5, 6.7, 6.8, 7.4 and Spline Drive.
-
We make heads to fit most nipple sizes. If your model is not listed or if you have any questions please call us at (877) 306-1801.