Flexx Handlebar Bends - Moto

Flexx Handlebar Bend Charts

  • Sweep

    Shown in degrees / millimeters
  • Mid-section Width

    Enduro/Adventure bends measure 7.25" while Moto centers are 8.25".
  • Overall Width

    Measured from handle end to handle end in inches
  • Height

    High / low / standard measured in millimeters

Flexx Handlebar Notations and Definitions

  • Cross Reference bar chart Please see the bottom of the page for a complete cross reference list of popular bar bends from other manufactures as well as OEM offerings. Please email or call us if you don’t see the bend cross reference you are looking for or you need help choosing the correct bend.
  • Damper Crossbars Arched crossbars to accommodate over the bar steering dampers. Damper Crossbars can be added to any Flexx Handlebar. Sub/Fender Mount dampers do not require use of damper crossbars.
  • Enduro Bends Our Enduro bends have a 1" narrower mid section shown as measurement (B) with full length handles of our Moto bend, providing plenty of room to trim to your desired width.
  • Handle Length All Moto and Enduro bends offer 9” of handle room over an inch more than a traditional 7/8" or taper style bar. Adventure bends offer 10" of handle room.
  • Accessory Applications Flexx Handlebar can be used with enduro computers, trip computers, GPS, steering dampers, roll charts, etc., etc. We offer a dash in our store section that will easily accommodate most GPS.
  • Super Tenere/Adventure Bends The Super Tenere/Adventure bends are built on our narrow center section with longer handles, offering a full 10inches of handle room, easily accommodating all of your stock controls. We recommend Tenere customers use a threaded bar weight anchor to mount their stock bar weight/end caps. We offer threaded bar anchors in our store.  Any sweep can be built as a Tenere/Adventure bend.
  • Low Bar Low Bar-The Low bends are incredibly low at 63mm of height. Low bends require 19mm of clearance between the bottom of the bar and the top of the fork caps. Low bends are designed to used with a under bar damper, bringing the bar height down to 10mm lower than stock height in most applications.
  • All Flexx Handlebars require a 1 1/8" bar clamps.
  • All bars are shipped with silver bar pads – many other colors are available.

 

 

Handlebar Bend Options

10 Degree Bends (A) Sweep (C) Width (D) Height Part Number
10° Moto Low 10° / 40 32 62 FL-1000-10-32
10° Moto – 2003-2008 KTM 10° / 40 32 92 FL-1001-10-32
10° Moto Damper Crossbars 10° / 40 32 92 FL-1001-10-32SD
10° Enduro Low 10° / 40 31 63 FL-1000-10-31
10° Enduro 10° / 40 31 92 FL-1001-10-31
10° Enduro Damper Crossbars 10° / 40 31 92 FL-1001-10-31SD
10° Enduro High 10° / 40 31 116 FL-1003-10-31
10° Enduro High Damper Crossbars 10° / 40 31 116 FL-1003-10-31SD
10° Moto High 10° / 40 32 116 FL-1003-10-32
10° Moto High Damper Crossbars 10° / 40 32 116 FL-1003-10-32SD
10° Mini High 10° / 40 29 116 FL-1002-10-29
10° Mini High Damper Crossbars 10° / 40 29 116 FL-1002-10-29SD
10° Mini Low 10° / 40 29 63 FL-1000-10-29
10° Mini 10° / 40 29 92 FL-1001-10-29
10° Mini Damper Crossbars 10° / 40 29 92 FL-1001-10-29SD
12 Degree Bends (A) Sweep (C) Width (D) Height Part Number
12° Moto Low 12° / 54 32 63 FL-1000-12-32
12° Moto 12° / 54 32 92 FL-1001-12-32
12° Moto Damper Crossbars 12° / 54 32 92 FL-1001-12-32SD
12° Enduro Low 12° / 54 31 63 FL-1000-12-31
12° Enduro 12° / 54 31 92 FL-1001-12-31
12° Enduro Damper Crossbars 12° / 54 31 92 FL-1001-12-31SD
12° Enduro High 12° / 54 31 116 FL-1003-12-31
12° Enduro High Damper Crossbars 12° / 54 31 116 FL-1003-12-31SD
12° Moto High 12° / 54 32 116 FL-1003-12-32
12° Moto High Damper Crossbars 12° / 54 32 116 FL-1003-12-32SD
12° Mini High 12° / 54 29 116 FL-1002-12-29
12° Mini High Damper Crossbars 12° / 54 29 116 FL-1002-12-29SD
12° Mini 12° / 54 29 92 FL-1001-12-29
12° Mini Damper Crossbars 12° / 54 29 92 FL-1001-12-29SD
12° Mini Low 12° / 54 29 63 FL-1000-12-29
14 Degree Bends (A) Sweep (C) Width (D) Height Part Number
14° Moto Low 14° / 57 32 63 FL-1000-14-32
14° Moto 14° / 57 32 92 FL-1001-14-32
14° Moto Damper Crossbars 14° / 57 32 92 FL-1001-14-32SD
14° Enduro Low 14° / 57 31 63 FL-1000-14-31
14° Enduro 14° / 57 31 92 FL-1001-14-31
14° Enduro Damper Crossbars 14° / 57 31 92 FL-1001-14-31SD
14° Enduro High 14*/57 31 116 Fl-1003-14-31
14° Enduro High Damper Crossbars  14*/57 31 116 FL-1003-14-31SD
14° Moto High 14° / 57 32 116 FL-1003-14-32
14° Moto High Damper Crossbars 14° / 57 32 116 FL-1003-14-32SD
14° Mini High 14° / 57 29 116 FL-1003-14-29
14° Mini High Damper Crossbars 14° / 57 29 116 FL-1003-14-29SD
14° Mini Low 14° / 57 29 92 FL-1001-14-29
14° Mini Low Damper Crossbars 14° / 57 29 92 FL-1001-14-29
15 Degree Bends (A) Sweep (C) Width (D) Height Part Number
15° Moto 15° / 62 32 92 FL-1001-15-32
15° Moto Damper Crossbars 15° / 62 32 92 FL-1001-15-32SD
15° Enduro 15° / 62 31 92 FL-1001-15-31
15° Enduro Damper Crossbars 15° / 62 31 92 FL-1001-15-31SD
15º Enduro High 15° / 62 31 116 FL-1003-15-31
15º Enduro High Damper Crossbars 15° / 62 31 116 FL-1003-15-31SD
15° Moto High 15° / 62 32 116 FL-1003-15-32
15° BMW 15° / 62 31 116 FL-1003-15-31
15° Adventure Damper Crossbars 15° / 62 32 116 FL-1003-15-32SD
15° Super Tenere/Adventure 15° / 62 32.5 116 FL-1004-15-32.5
15° Mini High 15° / 62 29 116 FL-1002-15-29
15° Mini High Damper Crossbars 15° / 62 29 116 FL-1002-15-29SD
15° Mini Low 15° / 62 29 92 FL-1001-15-29
15° Mini Low Damper Crossbars 15° / 62 29 92 FL-1001-15-29SD
19 Degree Bends (A) Sweep (C) Width (D) Height Part Number
19° Moto 19° / 80mm 32/812 92 FL-1001-19-32
19° BMW 19° / 80mm 31/787 116 FL-1003-19-31
19° Super Tenere/Adventure 19° / 80mm 32.5/825.5 116 FL-1004-19-32.5

 

Popular Bends from Other Brands (Cross Reference)

Model (A) Sweep (C) Width (D) Height Comparable Flexx Handlebar
CR High 62 795 95 15° Moto
RC High 54 802 119 12° Moto High
971 54 802 99 12° Moto
RC 54 802 99 12° Moto
Windham/MC 57 803 92 14° Moto
YZF 2007-2012 62 795 90 15° Moto
Jimmy Button 67 807 110 15° Moto High
Stewart 55 805 93 12° Moto

 

OEM Cross Reference

Manufacturer / Model Comparable Flexx Handlebar Notes 
CR 85 12° Mini Requires oversize mounts
CRF 150 12° Mini Requires oversize mounts
CRFX 05-09 12° Moto Requires oversize mounts
CRF 250/450 12° Moto Requires oversize mounts
XR 400 14° Moto Requires oversize mounts
XR 650 14° Moto Requires oversize mounts
KX 65 12° Mini Requires oversize mounts
KX 85/100 12° Mini Requires oversize mounts
KX 125/250 12° Moto Requires oversize mounts
KX 250/450F 12° Moto Requires oversize mounts
KTM 03-08 SX/XC/XCW 10° Enduro  
KTM SX/SXF 09-12 10° Enduro  
KTM XC/XCW/EXC 09-12 14° Enduro  
KTM 85/105 10° MiniHigh  
KTM 65 12° Mini High  
KTM 50 SX 10° Mini  
RM 85 12° Mini Requires oversize mounts
RM 125/250 14° Moto Requires oversize mounts
RMZ 250/450 14° Moto  
DRZ 250/400/650 15° Moto Requires oversize mounts
Yamaha YZF/WR 15° Moto  
YZ 85 14° Mini Requires oversize mounts